Technology content trusted in North America and globally since 1999
8,423 Reviews & Articles | 64,517 News Posts

BIOSTAR Z370GT6 Motherboard Review (Page 10)

By Steven Bassiri from Dec 5, 2017 @ 17:08 CST
TweakTown Rating: 92%Manufacturer: BIOSTAR

Thermal Imaging and Power Consumption

System power is measured at the wall with an AC power meter.

biostar-z370gt6-motherboard-review

Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.

All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.

Thermal Testing at Stock Speeds:

The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). Thermal Images are taken at loop 15 of Intel Burn Test

biostar-z370gt6-motherboard-reviewbiostar-z370gt6-motherboard-review

Full frontal.

biostar-z370gt6-motherboard-reviewbiostar-z370gt6-motherboard-review

Up-close of the front of the VRM.

biostar-z370gt6-motherboard-reviewbiostar-z370gt6-motherboard-review

Up-close of the back of the VRM.

Thermal Testing at 4.9GHz/1.3v Overclocked Speeds:

The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). We standardize this test with a 4.9GHz on all cores with 1.3V real under load and take pictures at the 80% mark of HandBrake rendering a 4K video.

biostar-z370gt6-motherboard-reviewbiostar-z370gt6-motherboard-review

Up-close of the front and back of the VRM.

The Z370GT6's thermal performance is actually pretty decent at stock and overclocked it also very good, but that's mainly because all cores go back down to 4.4GHz, which is slightly above Intel's default specification. I am unsure whether it's the AVX offset or some type of internal VRM temperature/current limit, but you won't be able to easily overheat these VRMs because of that limiter. I do recommend a fan over the VRM area if you are going to overclock heavily.

Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).

PRICING: You can find the product discussed for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:

United States: Find other tech and computer products like this over at the Amazon website.

United Kingdom: Find other tech and computer products like this over at the Amazon UK website.

Canada: Find other tech and computer products like this over at the Amazon Canada website.

We openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion. If any company representative wishes to respond, we will publish the response here. Please contact us if you wish to respond.

Related Tags