Technology content trusted in North America and globally since 1999
8,097 Reviews & Articles | 60,996 News Posts

ASRock Z390 Taichi (Intel Z390) Motherboard Review

By: Steven Bassiri | Socket LGA 1150/1151 in Motherboards | Posted: Oct 25, 2018 3:00 pm
TweakTown Rating: 92%Manufacturer: ASRock

Thermal Imaging and Power Consumption

 

System power is measured at the wall with an AC power meter.

 

asrock-z390-taichi-intel-motherboard-review

 

Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.

 

 

All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and back side of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.

 

 

Thermal Testing at Stock Speeds:

 

The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). Thermal Images are taken at loop 15 of Intel Burn Test

 

asrock-z390-taichi-intel-motherboard-reviewasrock-z390-taichi-intel-motherboard-review

 

Full frontal.

 

asrock-z390-taichi-intel-motherboard-reviewasrock-z390-taichi-intel-motherboard-review

 

Up-close of the front of the VRM.

 

asrock-z390-taichi-intel-motherboard-reviewasrock-z390-taichi-intel-motherboard-review

 

Up-close of the back of the VRM.

 

The Z390 Taichi has a solid VRM with quite good parts, and performance is pretty solid. It can handle those high wattage events when running Prime 95. The back of the board never got higher than the front. We see a delta of less than 10C, which is excellent. Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).

    We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.

Related Tags

Got an opinion on this content? Post a comment below!
loading