Thermal Imaging and Power Consumption
System power is measured at the wall with an AC power meter.
Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.
All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.
Thermal Testing at Stock Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). Thermal Images are taken at loop 15 of Intel Burn Test
Up-close of the front of the VRM.
Up-close of the back of the VRM.
Thermal Testing at 4.9GHz/1.3v Overclocked Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). We standardize this test with a 4.9GHz on all cores with 1.3V real under load and take pictures at the 80% mark of HandBrake rendering a 4K video.
Up-close of the front and back of the VRM.
The Z370 GODLIKE GAMING's VRM runs full speed out of the box, and this could be due to the increased VCore, which seems to increase performance a bit over baseline. However, while it does seem to go full throttle at stock, temperatures on the rear of the motherboard never exceeded those on the front, which indicates that the motherboard's cooling mechanism works. We think the majority of the heat comes from the inductors on the motherboard, as they are unknown and the rest of the VRM is pretty similar to high-end offerings from other vendors.
I wouldn't worry about the VRM temperatures as long as you have decent case airflow. I will also mention that high-performance VRMs do come with the tradeoff that they run a bit hotter, especially when all phases are active at stock, it's like having a high-performance vehicle such as a Bugatti with a dozen internal water cooling systems. Overall the VRM is in the excellent range.
Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).
PRICING: You can find the product discussed for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: The MSI Z370 GODLIKE GAMING Motherboard retails for $ at Amazon.
United Kingdom: The MSI Z370 GODLIKE GAMING Motherboard retails for £XXX at Amazon UK.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging and Z370 GODLIKE GAMING Overview]
- Page 3 [MSI Z370 GODLIKE GAMING Circuit Analysis]
- Page 4 [MSI Z370 GODLIKE GAMING Circuit Analysis Continued]
- Page 5 [BIOS and Software]
- Page 6 [Test System Setup]
- Page 7 [Overclocking]
- Page 8 [CPU, Memory, and System Benchmarks]
- Page 9 [System IO Benchmarks]
- Page 10 [Thermal Imaging and Power Consumption]
- Page 11 [What's Hot, What's Not & Final Thoughts]
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- GTA 5 yanked from NVIDIA's GeForce Now streaming service
- The Clone Wars season 7 coming February 2020 on Disney+
- The Mandalorian's new trailer is like a Star Wars western
- Obi-Wan show confirmed for Disney+, Ewan McGregor to star
- Spears return to Elder Scrolls in new Morrowind remaster mod Skywind
- Lian Li TU150 Mini-ITX Chassis Review
- SteelSeries Arctis 9X Wireless Headset Review
- Seagate Gears 5TB Game Drive Review
- TRENDnet USB-C 2.5Gbe Network Adapter Review
- Mushkin Pilot-E NVMe M.2 SSD Review
- Snooker 19, the first official snooker game in a generation, is out now on Nintendo Switch
- Ultimate Fishing Simulator VR will debut in August
- Leyou Technologies Announces 2019 Interim Results
- Thermaltake A700 Aluminum Tempered Glass Edition Full Tower Chassis Now Available Simplicity Creates Its Own Path
- 2019 Thermaltake CaseMOD Invitational Season 2 Brings Twelve Top Modders Worldwide Together for the New Creation of the Core P5 V2 Chassis Battle for the Best