Thermal Imaging and Power Consumption
System power is measured at the wall with an AC power meter.
Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.
All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.
Thermal Testing at Stock Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). Thermal Images are taken at loop 15 of Intel Burn Test
Up-close of the front of the VRM.
Up-close of the back of the VRM.
Thermal Testing at 4.9GHz/1.3v Overclocked Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). We standardize this test with a 4.9GHz on all cores with 1.3V real under load and take pictures at the 80% mark of HandBrake rendering a 4K video.
Up-close of the front and back of the VRM.
The Z370 Taichi produced excellent VRM temperature results, and that isn't very surprising as the 60A inductors, dual N-channel FETs, and new Intersil PWM work together in harmony. Temperatures on the front were always higher than on the rear of the motherboard, which means that the motherboard is being cooled well. Quality in the VRM section of the motherboard is superb.
Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).
PRICING: You can find the product discussed for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: The ASRock Z370 Taichi Motherboard retails for $XXX at Amazon.
United Kingdom: The ASRock Z370 Taichi Motherboard retails for £XXX at Amazon UK.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging and Z370 Taichi Overview]
- Page 3 [ASRock Z370 Taichi Circuit Analysis]
- Page 4 [ASRock Z370 Taichi Circuit Analysis Continued]
- Page 5 [BIOS and Software]
- Page 6 [Test System Setup]
- Page 7 [Overclocking]
- Page 8 [CPU, Memory, and System Benchmarks]
- Page 9 [System IO Benchmarks]
- Page 10 [Thermal Imaging and Power Consumption]
- Page 11 [What's Hot, What's Not & Final Thoughts]
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Super Smash Bros. Ultimate: Piranha Plant debuts 'February'
- Mortal Kombat 11 on Switch has 'geometry reductions' & more
- New Layers of Fear 2 trailer cruises the midnight seas
- How to redeem your Piranha Plant, Super Smash Bros. Ultimate
- Square Enix to make more HD-2D games like Octopath Traveler
- Optimum Health Optimum Health is conjugated linoleic risky.
- best 470 board for Windows 7?????????
- Can't connect to my Wifi network
- Need advice and build help
- Gigabyte ga-b75-d3v rev 1.0
- Customers Ask and Canon Delivers: New Professional Print & Layout Solution Now Available for Commercial, In-house and Professional Photographers
- OPPO Unveiled 10x Lossless Zoom, Ahead of Its Debut at MWC 2019
- True Flip Reveals Crypto-Themed Mining Factory With Plasmatron Bonus
- Stardock Announces a New Expansion for Galactic Civilizations III - Galactic Civilizations III: Retribution
- Cyberpunk Action-RPG Disjunction Coming to Steam Summer 2019