TweakTown's 3D Printers content from within our Maker & DIY category - Page 1

Tyler Bernath |

Dec 20, 2016 @ 21:12 CST |

If you are in the market for a turnkey solution to 3D printing, M3D may have a solution for you in the Micro. Let's take a close look. Read the review.

Steven Bassiri |

Nov 20, 2014 @ 9:08 CST |

Steven takes us on a tour of XYZprinting's Da Vinci 1.0 3D printer. Its value impressed us for the features included - here's our full review of it. Read the review.

Charles Gantt |

Jun 27, 2014 @ 9:15 CDT |

Charles walks us through what our portable 3D printer toolkit should include. Read on and see what tools you may be missing to make your experience better. Read the article.

Charles Gantt |

Jun 25, 2014 @ 9:02 CDT |

Hobby 3D printing is often referred to as a novelty, but the desktop 3D printer can be practical and useful, too. Let's see what Charles does for a GoPro. Read the article.

Charles Gantt |

Jun 20, 2014 @ 22:35 CDT |

Just like PCs, 3D printers are subject to overheating, and precautions need to be taken to prevent this. Follow on as Charles tells us more about it. Read the article.

Charles Gantt |

Apr 18, 2014 @ 17:03 CDT |

The Ord Bot Hadron from Punchtec is a very versatile 3D printer that changed the way Charles think about printing with PLA and 1.75mm filament. Read the review.

Charles Gantt |

Mar 18, 2014 @ 20:51 CDT |

In this installment, Charles tells us why using high-quality filament is one of the most important parameters in achieving good results. Read the article.

Charles Gantt |

Feb 13, 2014 @ 21:02 CST |

3D printing requires more than a 3D printer and a PC. Follow along as Charles covers the typical tools needed to operate and maintain it. Read the guide.

Charles Gantt |

Feb 13, 2014 @ 0:02 CST |

Charles walks us through his method of making a batch of ABS Juice which promotes less warping and better print adhesion to the printing surface. Read the guide.

Charles Gantt |

Jan 17, 2014 @ 2:12 CST |

In his first installment, Charles shows you how to improve print quality by installing a fan ducted to the hot end. Read the article.

Charles Gantt |

Jan 15, 2014 @ 20:06 CST |

Charles unboxes one of Punchtec's Ord Bot Hadron 3D printers. Read the article.

Charles Gantt |

Jun 2, 2013 @ 21:59 CDT |

In our last installment, we discussed what made up a 3D printer, and what one should pay attention to when considering purchasing one. Today we are going to take a few more steps down the 3D printing... Read the guide.

Charles Gantt |

Mar 29, 2013 @ 14:22 CDT |

Not all 3D printers are alike, and buying a 3D printer without any guidance can quickly amount to a lot of wasted money or wasted time trying to get everything adjusted. This series will help educate... Read the guide.