PCMark Vantage - Hard Disk Tests
Version and / or Patch Used: 184.108.40.206
Developer Homepage: http://www.futuremark.com
Product Homepage: http://www.futuremark.com/products/pcmarkvantage
PCMark Vantage is the first objective hardware performance benchmark for PCs running 32 and 64 bit versions of Microsoft Windows Vista. PCMark Vantage is perfectly suited for benchmarking any type of Microsoft Windows Vista PC from multimedia home entertainment systems and laptops to dedicated workstations and high-end gaming rigs. Regardless of whether the benchmarker is an artist or an IT Professional, PCMark Vantage shows the user where their system soars or falls flat, and how to get the most performance possible out of their hardware. PCMark Vantage is easy enough for even the most casual enthusiast to use yet supports in-depth, professional industry grade testing.
The reason we like PCMark Vantage is because the recorded traces are played back without system stops. What we see is the raw performance of the drive. This allows us to see a marked difference between scoring that other trace based benchmarks do not exhibit. An example of a marked difference in scoring on the same drive would be empty vs. filled vs. steady state.
We run Vantage 3 ways. The first run is with the OS drive/Array 75% full to simulate a lightly used OS volume filled with data to an amount we feel is common for most users. The second run is with the OS volume written into a "Steady State" utilizing SNIA's guidelines (Rev 1.1). Steady state testing simulates a drive/arrays performance similar to that of a drive/array that has been subjected to consumer workloads for extensive amounts of time. The third run is a Vantage HDD test with the test drive/array attached as an empty lightly used secondary device.
OS Volume 75% full - Lightly Used
OS Volume 75% full - Steady State
Secondary Volume Empty - Lightly Used
As you can see, there's a big difference between an empty drive/array and one that's 75% full/used and one that's in a steady state.
The important scores to pay attention to are "OS Volume Steady State" and, "OS Volume 75% full". These two categories are most important because they are indicative of typical of consumer based user states.
When a drive/array is in a steady state it means garbage collection is running at the same time it's reading/writing. Here we can see the Ultra Plus drives, with half the channels of the other drives on our chart, are incurring a performance penalty is this scenario.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction]
- Page 2 [Specifications, Pricing and Availability]
- Page 3 [SanDisk Ultra Plus 256GB SSD]
- Page 4 [Benchmarks - Test System Setup, Drive Properties & ATTO Baseline Performance]
- Page 5 [Benchmarks - Anvil Storage Utilities]
- Page 6 [Benchmarks - CrystalDiskMark]
- Page 7 [Benchmarks - AS SSD]
- Page 8 [Benchmarks - PCMark Vantage]
- Page 9 [Benchmarks - PCMark 7]
- Page 10 [Benchmarks - PCMark 8]
- Page 11 [Secondary Volume Benchmarks - Blackmagicdesign's Disk Speed Test]
- Page 12 [Secondary Volume Benchmarks - Disk Response Times]
- Page 13 [Secondary Volume Benchmarks - DiskBench]
- Page 14 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.