I have had a BPX NVMe SSD for some time, but only recently noticed the temperatures. I'm averaging around 66c and reaching 77c maximum, should I worry about keeping it cool? Should I install a heat sink? The SSD is currently placed between the CPU cooler and the GPU, could temperatures drop down if I place it directly under the GPU?
Hi Austin,
OK, first, the original BPX from MyDigitalSSD had its temperature sensor on the controller so it reads a more direct temperature compared to other drives. That said, it's always best to keep components as cool as possible.
If you have the means, read this article I wrote on m.2 heat sinks. It may offer some insight on the available cooling solutions for your BPX, as it was one of the drives tested.
TLDR: I'd give a heat sink a try, I preferred the EKWB solution for aesthetics, but I would also make sure you have good airflow in and out of your chassis.
As far as location goes, I would make sure your bottom slots aren't controlled by the chipset, as it will often give lower throughput than top slots that run from CPU lanes.
Last updated: Nov 3, 2020 at 08:10 pm CST