70/30 Mixed Workload Test (Sledgehammer)
Version and / or Patch Used: Iometer 2014
Heavy Workload Model
This test hammers a drive so hard we've dubbed it "Sledgehammer". Our 70/30 Mixed Workload test is designed to simulate a heavy-duty enthusiast/workstation steady-state environment. We feel that a mix of 70% read/30% write, full random 4K transfers best represents this type of user environment. Our test allows us to see the drive enter into and reach a steady state as the test progresses.
Phase one of the test preconditions the drive for 1 hour with 128K sequential writes. Phase two of the test runs a 70% read/30% write, full random 4K transfer workload on the drive for 1 hour. We log and chart (phase two) IOPS data at 5-second intervals for 1 hour (720 data points). 60 data points = 5 minutes.
What we like about this test is that it reflects reality. Everything lines up, as it should. Consumer drives don't outperform Enterprise-Class SSDs that were designed for enterprise workloads. Consumer drives based on old technology are not outperforming modern Performance-Class SSDs, etc.
The EVO's all display tight consistency which is what we want to see from our SSDs. Again, OP plays a key role in this testing, with a little more, the EVO's would perform much better. The SP550, although it has a better average throughput than the 750 EVOs, is all over the place with massive variability throughout the test. This is not what we want to see, because consistency is very important.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Drive Specifications, Pricing and Availability]
- Page 2 [Drive Details]
- Page 3 [Test System Setup and Properties]
- Page 4 [Synthetic Benchmarks – ATTO & Anvil Storage Utilities]
- Page 5 [Synthetic Benchmarks - CrystalDiskMark & AS SSD]
- Page 6 [Benchmarks (Trace-Based OS Disk) - PCMark Vantage, PCMark 7 & PCMark 8]
- Page 7 [Benchmarks (Secondary Volume) – Max IOPS, Disk Response & Transfer Rates]
- Page 8 [Benchmarks (Secondary Volume) - PCMark 8 Extended]
- Page 9 [Benchmarks (Secondary Volume) – 70/30 Mixed Workload]
- Page 10 [Maxed-Out Performance (MOP)]
- Page 11 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Third 'Cloverfield' film revealed & delayed by 8 months
- John Glenn, the first American to orbit the Earth, dies
- AMD reboots its drivers with Crimson ReLive Edition
- Faraday Future car will have cameras instead of mirrors
- SpaceX's December launch postponed until early January
- Dk-q1 / dk-q1h
- asrock 880g pro3 codes E8>54>19
- ADATA SC660 240GB Portable SSD Review
- Will this Build be Quite, Small and powerfull ?
- Mouse skipping/jumping and audio stuttering
- Bluetooth 5 specification now available, 4x Range, 2x Speed
- Zadak511 reveals SHIELD Series with RGB DDR4 RAM and RGB SSD
- Jonsbo announces QT03A and VR2 cases, and FR-101 fan series
- Cooler Master announces the MasterCase Maker 5T
- be quiet! announces the Dark Base Pro 900 case with tempered glass window side panel