Accessories and Documentation
The little cardboard box of goodies has everything you need to get started with the build. There are standoffs and a socket to tighten them, brackets to allow the steel break-out panel for the 5.25" bay to be replaced, and a handful of grommets to mount drives via the keyed holes found throughout. The bottom row offers ODD drive thumbscrews, a handful of M3 screws, some 6/32 screws, and four hex head screws for the PSU.
There are only a few places on the floor of the chassis to tend any wiring, but you are supplied with five zip-ties to get wiring under control. We also like that we received a native USB 3.0 to USB 2.0 adapter so that you don't have to have the latest and greatest motherboard to have USB ports at the front of the chassis.
The quick installation guide offers all you will need to get the build started, and work your way right on through to the end. The guide starts with diagrams of how the chassis is laid out, and it shows all of the removable components. It then goes on, step-by-step, with small renderings and concise text to show you how everything is done.
After removing four screws from the face of the bay, accessed under the front bezel, and pulling one more from each side, the 5.25" bay is now out to leave plenty of room for the fans and AIO that we have planned to use in here.
This storage rack, which we had to remove right away, had four screws holding it in place. On this side, two 2.5" drives can be installed via the tabs with pins and screws. This still allows the other side to use grommets, and hang 3.5" drives.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications and Pricing]
- Page 2 [Packaging]
- Page 3 [BitFenix Prodigy M Micro-ATX Chassis]
- Page 4 [Inside the Prodigy M]
- Page 5 [Accessories and Documentation]
- Page 6 [Case Build and Finished Product]
- Page 7 [Final Thoughts]
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Nintendo shares skyrocket to 8-year high
- Alienware Aurora reach reasonable price for Memorial Day
- GTA Online earns big for Take-Two
- Red Dead Redemption 2 built from scratch for consoles
- Square Enix to embrace games as a service business model
- Gigabyte z170 UD5: Question about Voltage Spikes/Offset
- ASRock AliveXFire-esata2 compatibility with Phenom II X4 980
- m4a88td-m/usb3 & Windows 10
- OWC ThunderBay 4 Mini Thunderbolt 2 Review
- Prey benchmarked: Radeon RX 580 vs. GeForce GTX 1060
- Qualcomm fuels IoT growth by currently delivering more than 1 million chips a day into a wide range of connected applications
- Team Group announces theme for COMPUTEX 2017 showcase: go beyond the limit and reach for the top
- SAPPHIRE announces PULSE Radeon RX 560 graphics card
- ELITEGROUP computer to stand out at Computex for its smart campus deployment, robotic technology, education laptops, tablets, mini PC, and motherboards
- ADATA Shares a Symphony of Technology at Computex 2017