Xigmatek Balder SD1283 HDT CPU Cooler

Xigmatek rethinks the S1283 coolers and offers us an enhanced version. Let's see if they made the right adjustments.

Published
Updated
Manufacturer: Xigmatek
7 minutes & 14 seconds read time

Introduction


Xigmatek Balder SD1283 HDT CPU Cooler 99




Xigmatek has been gracious enough to allow me to test quite a few of their coolers. All of the usual suspects cross my mind; the 1283's, 1284's and even the Thor's Hammer. In between there have been many variations of each, except for the Hammer, mostly consisting in the beginning with a different fan. More recently, Xigmatek had gone the way of various Nickel plated coatings to enhance and refresh the coolers line. This time I am happy to say it isn't either of those reasons that has me excited about this cooler.

This time around, it is a bit more in depth than the more obvious increase of the CFM of the fan, or adding coatings for both performance and oxidation factors, as well as making cleaning a bit easier in my opinion, of which this new CPU cooler does have both. It has also got a more appealing figure. Xigmatek has provided a uniquely shaped 1283 cooler that is appealing to me, as it is a change from the same old thing.

As with most of the current line of Xigmatek CPU coolers, they are taking on the names of Norse gods and main players in their mythology. This time around is no exception, it takes on the name of Balder. This mythological man was most known for his death and rebirth, very fitting in my opinion of the cooler in my hands. I think it is about time to get some images and get the testing underway. Then we can see how well the rebirth of the 1283 goes for Xigmatek.

Specifications, Availability and Pricing




Xigmatek Balder SD1283 HDT CPU Cooler 01


There isn't really much to discuss that we haven't covered with all the other 1283 coolers Xigmatek has released up till now. The Balder has the same 8mm diameter heat pipes sandwiched in a base, both made of copper. The pipes carry the heat into 51 Aluminum fins, pressed over the heat pipes. The main differences are fin design, overall shape and the ability to hold two fans, whilst still keeping weight to a slim 700 grams.

Cooling is handled by an 89 CFM fan, just like the one placed with the Dark Knight. The black body and white LED's make this 4-pin connected fan a great choice for the Balder as well. With up to 2200 RPM and 89 CFM, the Balder has its best chance at keeping to respectable temperatures. Due to the new design, Xigmatek loses a bit of fin area and the fan is a good choice to help compensate for the loss.

The Balder will fit any AMD since socket 754 and will fit any Intel from socket LGA775. This in mind, it is a good choice for its universal nature alone. While the cooler is yet to be released, most times when I get my sample it is only a few short weeks and they hit shelves anywhere. I was informed that the suggested retail of the Balder SD1283 is $46.99. Yes, it is a bit more than the basic 1283 series cooler, but the Balder does offer flash and elegance over its older brother. Now to let the testing speak for itself and see if the extra bit of money is worth the price.

Packaging


The Package

Xigmatek Balder SD1283 HDT CPU Cooler 02


The Balder SD1283 is shipped in a see through plastic package with grey and teal highlights. A bit of scrollwork to the right draws your eye to the 120mm, LED lit fan. This HDT cooler also comes AMD ready as well as with i5 and i7 compatibility, as shown at the bottom.

Xigmatek Balder SD1283 HDT CPU Cooler 03


The right side of the package is clear as well, on this side allowing a view of the top of the Balder. At the bottom Xigmatek indicates the SD1283 is plated with "Bright-Nickel" just below the image of the fins.

Xigmatek Balder SD1283 HDT CPU Cooler 04


The rear of the packaging is backed in black; this allows a better view of the specifications chart and the images to the right are about the anti-vibration fan mounts we have come to appreciate.

Xigmatek Balder SD1283 HDT CPU Cooler 05


Getting our last look at the outer packaging, Xigmatek fills this side with the Balder's compatibility list. This cooler will fit any LGA775 cooler and newer sockets from Intel, as well as pretty much anything Socket 939 and after for AMD.

Xigmatek Balder SD1283 HDT CPU Cooler 06


Removing the cooler from the outer packaging leaves us with more plastic on the inside. The Balder is housed in a two layer inner package. The first layer surrounds the fan, while the second layer surrounds the actual cooler, keeping both separated and secure during shipping. The indented section to the left is where all the hardware was shipped, which was removed for this image.

The Xigmatek Balder SD1283 H.D.T. CPU Cooler




Xigmatek Balder SD1283 HDT CPU Cooler 07


We get our first look at the new 51 fin design. Starting with what we are used to seeing, a copper base with three HDT pipes going in to a large stack of aluminium fins. Like a few predecessors, this cooler is also plated in Nickel.

Xigmatek Balder SD1283 HDT CPU Cooler 08


The last image had hints of the shape change going on with the Balder. This image of the side continues this. A couple of standouts are the enclosed sides, where they fold over the fins to recapture airflow to put it to better use. The second thing to note is the ability of a 1283 cooler to easily strap on two 120mm fans.

Xigmatek Balder SD1283 HDT CPU Cooler 09


You've all waited long enough; here we have the "shape shot". Looking at the Balder from the top shows the new "X" design of the fins. Also as you could see before, the bump in the center of the fins carries all the way to the top, where Xigmatek proudly stamps their logo.

Xigmatek Balder SD1283 HDT CPU Cooler 10


Moving on to the business end of the Balder, I was pleased to see one of the smoothest bases on a Xigmatek cooler I have seen to date. This base is very level and flat, aside from the gaps between the HDT pipes and the base support. My sample did arrive with a slight "ding" in the one pipe, but I don't think it will do much to hinder any testing, as it is on the outermost corner of where the IHS will make contact.

Xigmatek Balder SD1283 HDT CPU Cooler 11


The fan of choice from Xigmatek is an 89 CFM, white LED, blackish coloured fan. Since there is a bit less fin surface area over say the basic S-1283, a strong fan is a good choice for companionship.

Xigmatek Balder SD1283 HDT CPU Cooler 12


In typical Xigmatek fashion, the 120mm fan covers almost all of the fins and is an attractive contrast against the "bright-Nickel" plating.

Xigmatek Balder SD1283 HDT CPU Cooler 13


In this profile image, you can see the cooler is as wide as the rest of the S1283's and still may cause issues with taller spreaders on RAM modules if the slots nearest the CPU are used.

Xigmatek Balder SD1283 HDT CPU Cooler 14


Something I personally would love to see on the 1283 series is grooves in the opposite direction on the top of the base. I realize this would take a new AMD latch bar, but I know a lot of AMD users put off this cooler due to the way it aligns in the case on the motherboard. Besides that, the two holes are there to accept the legs for Intel mounting.

Accessories and Documentation




Xigmatek Balder SD1283 HDT CPU Cooler 15


Xigmatek ships a nice little hardware assortment with the Balder. You get an AMD latch bar, Intel universal back plate and the accompanying legs that attach to the base. A baggie with eight, anti-vibration fan mounts, a little packet of TIM and another baggie with the four Intel mounting screws and springs, and the two screws to mount the legs complete the list.

Xigmatek Balder SD1283 HDT CPU Cooler 16


Xigmatek also ships a pretty comprehensive manual with a check list. If you have used a Xigmatek before, there is nothing new to expect. If you haven't, these instructions will lead you right on through the installation with ease.

Test System & Testing Results


Test System & Test Results

TweakTown uses a different method for testing CPU heatsinks which allows for an even playing field across all product tests. We feel that by using the same ambient temperature and strict lab-like testing procedures we are able to accurately compare one product to another. More information on our testing procedure can be found in the T.E.C.C. article here.

Xigmatek Balder SD1283 HDT CPU Cooler 17


Compared with just other Xigmateks on the list, the Balder plays right in where I would have expected it. It is just a touch behind the Dark Knight, which uses a similar fan and has a bit more surface area. I have to say Xigmatek did a nice job eliminating fin area and still keeping performance on par.

Xigmatek Balder SD1283 HDT CPU Cooler 18


I hate to keep using the word typical, but the noise levels of the accompanying 89 CFM fan is right where it should be, so I guess I should use 'expected' for my results over typical. I do wish Xigmatek would have sent a second fan for testing the push/pull effectiveness. I would imagine you can get another two degrees at least with a second matching fan.

Final Thoughts




Being a sucker for unique shapes and appealing looks, the Balder struck a chord right off the bat with me. Looking past the sexiness of the cooler is the intention. The testing showed the Balder is what we should expect from the 1283 coolers, just this time a little differently. The new fin design for Xigmatek is an attractive start. Adding the black fan with white LED's is a plus, but plating the entire cooler in "Bright-Nickel" takes it over the top for me, then to see it is dual fan compatible just takes it over the edge of what I want to see in a Xigmatek cooler; they hit the nail on the head with the Balder.

A couple of issues I need to sort through. The ding in the heat pipe is unacceptable. Looking at the packaging, the damage had to be done before the box was sealed. I understand people have bad days at work, but that should have been easily spotted and pulled from the line. The second complaint isn't even for me, as I am an avid Intel user. I would like to see an additional set of grooves in the base for AMD users. With this small setback overcome, I think there would be no reason not to suggest the Balder to any user with accommodating chassis conditions.

In my opinion, the little bit of a premium price is worth it to me. Not only do I get my flashiness that I love, but I get performance levels that I have come to expect from Xigmatek. The $46.99 is only the MSRP, which means once it hits shelves it can be had possibly even cheaper. I for one am glad Xigmatek has changed the square fins, moving to the "x" configuration. This makes the Balder not only a rebirth for Xigmatek's 1283 lineup, but a nice choice for cooling in any rig.

What do TweakTown.com awards mean? Click for details!

PRICING: You can find products similar to this one for sale below.

USUnited States: Find other tech and computer products like this over at Amazon.com

UKUnited Kingdom: Find other tech and computer products like this over at Amazon.co.uk

AUAustralia: Find other tech and computer products like this over at Amazon.com.au

CACanada: Find other tech and computer products like this over at Amazon.ca

DEDeutschland: Finde andere Technik- und Computerprodukte wie dieses auf Amazon.de

Chad joined the TweakTown team in 2009 and has since reviewed 100s of new techy items. After a year of gaming, Chad caught the OC bug. With overclocking comes the need for better cooling, and Chad has had many air and water setups. With a few years of abusing computer parts, he decided to take his chances and try to get a review job. As an avid overclocker, Chad is always looking for the next leg up in RAM and coolers.

Newsletter Subscription
We openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion. If any company representative wishes to respond, we will publish the response here. Please contact us if you wish to respond.