TweakTown NewsRefine News by Category:
Active Hardware has just posted a review of the Soyo SY-K7V Dragon Motherboard. here's a snip:
"Soyo seems intent on penetrating deep into territory that has long been ruled by a cadre of elite motherboard designers. And, not only are they gearing up to hit the scene with style, but also with force. The K7V Dragon is veritable piece of fiberglass dynamite, and we can readily attest to the fact that Soyo has applied all of their savoir-faire, and included a full bundle of Overclocking functions, with nothing left to be desired."
accelenation takes a look at the MSI K7T266 Pro2-RU Motherboard. It features the new VIA KT266A chipset and supports DDR memory. here's a snip:
"MSI has been one of the few motherboard makers in the past year that has really tried to pack new and innovative features on their boards. I don't know about you, but I really appreciate their effort. Some of their features may be a little over the top, but at least their aren't content to stagnate like some other mainboard makers."
Following on from Mike's mention of the release of the XP processor, the guys over at AMD Zone have started a forum thread listing compatible motherboards. So if you want to know whether your motherboard will support the new chip, or if you are currently running an XP system and would like to list your setup, have a look at the forum thread here.
For those who are still wanting the KT266A chipset, head on over to BlargOC and see if the MSI K7T266 Pro 2RU Motherboard is what you're looking for. here's a snip:
"MSI's engineers have done a brilliant job of keeping the capacitors a decent distance away from the socket and I can't think of any heatsink which would be too big to fit or even big enough to be even slightly difficult to fit, a far cry from the ABit KG7-Lite where it could be a tough job even installing a basic Taisol heatsink!"
Rated PC have just finished up a review of the Gigabyte GA-7DXR Motherboard. It uses the AMD 760 chipset and supports DDR RAM. here's a snip:
"The GA-7DXR has enough jumpers settings to keep an overclocker busy for a life time. The three magic settings are available: CPU clock multiplier, front side bus, and Vcore voltage. The multiplier ratios range from 5X to 12.5X. In our test system, a Tbird 1.4GHz 266FSB easily hit 1.6GHz at stable conditions, with the help of major cooling power of the Vantec CCK-6035D. The FSB settings are limited to only eight settings from the jumpers, but the BIOS FSB setting offers a much wider range: 150MHz to 250MHz. To put it simply, the GA-7DXR offer the most complete overclocking capabilities of any other AMD-760 motherboard. On the other hand, for beginners the number of available setting that must be set by the jumpers might be overwhelming."
EPoX is at it yet again. accelenation wants to share what they found out about the EPoX 8KHA+ Motherboard. It features that new KT266A chipset. here's a snip:
"EPoX looks like it will be the first manufacturer to actually have the boards on US store shelves, and judging by their last four Athlon boards, the 8K7A, 8KHA, 8KTA3Pro, and 8KTA3, one would assume that this board will definitely be a contender for your money. So let's take a closer look at it."
it's been a while since we have heard from a contender using the ALi Magik chipset, but here ya go. Head on over to OC Tools and see their take on the IWill KA266+ Motherboard. To give you a tease, they were able to run the FSB at 180MHz!. that's right, a 360MHz DDR monster on the loose. here's a snip:
"With the overclockers in mind, I'm sure they made it a point to impress us somehow with this DDR board. If this board doesn't impress you, then you are very hard to please. Out of the box, this retail board performed at more than impressive levels with just average cooling. No hardcore stuff that we so like to put to get that extra bit of performance out. Just all the basic stuff needed to run it."
For those who want the power of a Pentium4 processor but want to still use their old RAM, there is the i845 chipset. t-break has posted a review of the Shuttle AB30R Motherboard that just happens to use that chipset. here's a snip:
"The Pentium 4 is still evolving. Intel realized that RDRAM wasn't really going mainstream and thus decided to introduce an SDRAM based chipset in the for of 845. We got one such motherboard from Shuttle modeled as AB30. If you remember, the Shuttle AK31 won an Editor's Choice award from us because of it's performance, stability and overclocking. Can Shuttle pull it off again?"
For those who are not yet ready to jump aboard the DDR bandwagon, take a stroll over to Overclockers Online. They have just posted a review of the IWill KK266Plus-R Motherboard and want to share the scoop with you. here's a snip:
"To check out what our KK266plus-R was capable of, we decided to test it by using the fastest AMD CPU currently available (the Athlon 1.4GHz) and some fast OCZ Performance Max SDRAM (pretested stable @ 175MHz CAS3) to be sure the memory doesn't act as a bottleneck. After some serious experimenting, I found out that the KK266plus-R is capable of running my Athlon CPU and the memory @ 161MHz CAS3 and @ 153MHz CAS2. that's quite an achievement, don't you think?? :)"
The folks over at OC Workbench have just posted a review of the Shuttle AV40 Motherboard. It features support for the Pentium4 Processor and uses the VIA P4x266 chipset and DDR memory.