Technology and gaming content trusted in North America and globally since 1999
8,614 Reviews & Articles | 61,008 News Posts

EVGA DG-77 Mid-Tower Chassis Review (Page 5)

Chad Sebring | Apr 24, 2018 at 6:00 pm CDT - 1 min, 50 secs time to read this page
Rating: 91%Manufacturer: EVGA

Hardware & Documentation

EVGA DG-77 Mid-Tower Chassis Review 25 |

EVGA is not afraid to share when it comes to the amount of hardware they provide in the DG-77. The bag on the left has a handful of 6/32 screws for HDD installation. For 2.5" drives and the motherboard installation, which used M3 screws, grab for the second bag seen here. The chassis comes with standoffs already installed, but here, have a lot more. The last bag contains fan screws, and with a few locations left to fill, that bag will cover you for this case and maybe two others. However, when it came to wire management help, we got only four zip-ties.

EVGA DG-77 Mid-Tower Chassis Review 26 |

The PSU mounting plate was expected, as we found it with the FPS chassis as well. What we did not expect was the additional expansion slot cover plate. The plate offers a removable section, which allows for vertical installation of a video card. There is also a small plastic spacer, which clips the card into the new expansion slot.

EVGA DG-77 Mid-Tower Chassis Review 27 |

One of maybe three cases we have seen to date, which offer vertical GPU mounting, and include the riser card to allow it to happen. The left end connects to the motherboard, the middle is all fancy with the EVGA name all over it, and the right end screws to the PSU cover and is where the card is connected.

EVGA DG-77 Mid-Tower Chassis Review 28 |

The tops of every thumbscrew on the chassis has a white plastic sticker with a black "E" in the center. If you would like the contrast of black on the screws instead, EVGA ships a set of sixteen covers, to swap them out.

EVGA DG-77 Mid-Tower Chassis Review 29 |

The manual shows us what the parts are all for, and there is the standard build guide. However, there is not a single scrap of information on the optional GPU mounting, which is needed. We did notice that while looking at the DG-77 online, EVGA shows more color options, but in our box, we got orange, yellow, blue, and green DG-77 stickers to replace the one on the left side panel. Although they don't have to go on the case, you can put them anywhere.

Last updated: Nov 15, 2019 at 01:16 pm CST

PRICING: You can find products similar to this one for sale below.

USUnited States: Find other tech and computer products like this over at

UKUnited Kingdom: Find other tech and computer products like this over at

AUAustralia: Find other tech and computer products like this over at

CACanada: Find other tech and computer products like this over at

DEDeutschland: Finde andere Technik- und Computerprodukte wie dieses auf

Chad Sebring


After a year of gaming, Chad caught the OC bug. With overclocking comes the need for better cooling, and Chad has had many air and water setups. With a few years of abusing computer parts, he decided to take his chances and try to get a review job. As an avid overclocker, Chad is always looking for the next leg up in RAM, cooling, as well as peripherals.

We openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion. If any company representative wishes to respond, we will publish the response here. Please contact us if you wish to respond.

Related Tags