Technology content trusted in North America and globally since 1999
8,036 Reviews & Articles | 60,458 News Posts

EVGA DG-77 Mid-Tower Chassis Review

By: Chad Sebring | Mid-Tower Cases in Cases, Cooling & PSU | Posted: Apr 24, 2018 11:00 pm
TweakTown Rating: 91%Manufacturer: EVGA

EVGA DG-77 Mid-Tower Chassis

 

 

evga-dg-77-mid-tower-chassis-review_07

 

The front of the DG-77 is a view of a large class cover panel, which is screwed into a plastic frame. The glass panel is slightly offset from center, which allows the right side of the glass to be used as an air duct to supply the chassis with air.

 

evga-dg-77-mid-tower-chassis-review_08

 

 

On top of the chassis, running along the left side, we have the front I/O panel. From left to right, we have the K-Boost button, a reset buttons, HD Audio jacks, two USB 3.0 ports with dust covers, the power button, and EVGA's name.

 

evga-dg-77-mid-tower-chassis-review_09

 

Moving back a bit to get a better view of the rest of the top panel, we find slots which are painted black, which resembles features found on the DG-8 Series cases. The top is removable and makes access to mounting fans under it possible.

 

evga-dg-77-mid-tower-chassis-review_10

 

Much like the front, all you see on the side is an expanse of glass. The edges of it are painted to keep the view of the frame blacked, and there is no tint to the glass to block the view inside. The DG-77 found in the top-right corner is only one choice, and it can be removed and replaced with stickers which EVGA has provided.

 

evga-dg-77-mid-tower-chassis-review_11

 

The back of the chassis has a clean and professional looking appearance. It is because EVGA adds a plastic cover panel over the steel. We also see it reads Designed by EVGA near the bottom.

 

evga-dg-77-mid-tower-chassis-review_12

 

The right side of the DG-77 also offers a panel made of tempered glass, but this time the entire panel is painted on the inside to keep any mess behind it hidden. Since we have seen sixteen of them so far, we like the added touch of the "E" applied to the tips of all of the thumbscrews.

 

evga-dg-77-mid-tower-chassis-review_13

 

Under the chassis, we see chunky plastic feet with rubber pads on them. There is a removable dust filter under the PSU, but it is not easily accessed. Between the front feet, we see holes which allow a 3.5" or 3.5" drive to mount to the floor, and the sticker is important, you will need the serial number for registration.

    We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.

Related Tags

Got an opinion on this content? Post a comment below!
loading