Case Build & Finished Product
Once the build is completed and we make our way back to the front of the chassis, we are pleased to see that nothing has changed. We still see the sleek and sophisticated simplicity that In Win offers right out of the box.
Installing the motherboard and video card is as easy as can be in the In Win 101, and while only two screws are securing the AIO, we were able to fit a 280mm radiator on the floor. The cable routing holes are placed well, and the finished product is clean and attractive to look at.
The PSU slides into place without much fuss, but the rear I/O cover isn't locked into place, it slides up and down, which can cause a slight slowdown in placing the motherboard into the chassis while you align it. As for the card, it aligns without needing for flex the chassis and sits level as expected.
Behind the motherboard tray, since we used cable extensions, we did have to get creative with the tie points, but even so, we were able to manage. Wiring is kept to the right of the fan locations to the left, and we found lots of room by the PSU to tuck in excess wires.
Now that the chassis is all back together, and we stepped back to take it all in, we like what we are seeing. The window is tinted slightly, but not enough to keep us from seeing inside of the chassis and looking at all of the main components.
Adding the power cable to the PSU and pressing the power button brings the In Win 101 to life. The front of the chassis begins to glow with red LED light in the clear plastic section, and is attractive without being flashy or gaudy in appearance.
Our last image of the In Win 101 shows that once powered, the LED lighting on the memory, the head unit, the motherboard, as well as on the side of the video card are all clearly visible. Many may want to add some interior chassis lighting to improve upon the view of the internal components, but we have no complaints about what we are seeing.
PRICING: You can find the product discussed for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: The IN WIN 101 Mid-Tower Chassis retails for $XXX at Amazon.
United Kingdom: The IN WIN 101 Mid-Tower Chassis retails for £XXX at Amazon UK.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [In Win 101 Mid-Tower Chassis]
- Page 4 [Inside the 101]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Dragon Ball FighterZ gets launch trailer days before release
- Rust will leave Steam Early Access on February 8
- Far Cry 5 official PC system requirements revealed
- Father of Sonic joins Square Enix to work on new game
- Stardew Valley was the most downloaded Switch game in 2017
- Spectre Bios Updates
- Lian-Li PC-O11 WW Feedback and O11 Air Feedback
- Investigation: Benefits to Prioritization Software
- When is a RX570 not a RX570?
- ASRock X370 Gaming-ITX/ac Gaming (AMD X370) Motherboard
- Toshiba Memory America Unveils UFS Devices Utilizing 64-Layer, 3D Flash Memory
- ASUS Announces GeForce GTX 1070 Ti Series Gaming Graphics Cards
- ASUS Announces ASUS Hangouts Meet Hardware Kit
- Colorful Announces iGame GeForce GTX 1070 Ti Vulcan X Top
- Gainward Announces its GeForce GTX 1070 Ti Series