Thermal Imaging and Power Consumption
System power is measured at the wall with an AC power meter.
Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.
All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.
Thermal Testing at Stock Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). Thermal Images are taken at loop 15 of Intel Burn Test
Up-close of the front of the VRM.
Up-close of the back of the VRM.
Thermal Testing at 4.9GHz/1.3v Overclocked Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans to the right of the motherboard from the (Corsair H110i) radiator are left on automatic mode (ramps with internal block temperature). Additionally, a 120mm fan is situated right above the VRM, and it blows down at a medium rate (very quiet). We standardize this test with a 4.9GHz on all cores with 1.3V real under load and take pictures at the 80% mark of HandBrake rendering a 4K video.
Up-close of the front and back of the VRM.
The C7Z370-CG's thermal performance is great. While the heat sinks aren't the craziest, the VRM components are of high enough quality to ensure things don't overheat. The VRM is not overtasked, in fact, the five phases can provide up to 250W and up to 2V, which is pretty intense.
It looks like MPS digital PWM and power stages are quite competitive. Notice that when we overclocked, temperatures aren't really that much higher than when things are at stock, so it's like most of the heat we saw at stock was just base heat from operational loss.
Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).
PRICING: You can find the product discussed for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: Find other tech and computer products like this over at Amazon`s website.
United Kingdom: Find other tech and computer products like this over at Amazon UK`s website.
Canada: Find other tech and computer products like this over at Amazon Canada`s website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging and C7Z370-CG-L Overview]
- Page 3 [Supermicro C7Z370-CG Circuit Analysis]
- Page 4 [Supermicro C7Z370-CG Circuit Analysis Continued]
- Page 5 [BIOS and Software]
- Page 6 [Test System Setup]
- Page 7 [Overclocking]
- Page 8 [CPU, Memory, and System Benchmarks]
- Page 9 [System IO Benchmarks]
- Page 10 [Thermal Imaging and Power Consumption]
- Page 11 [What's Hot, What's Not & Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Intel reportedly 'kills off' its upcoming 10nm process
- Jump Force features original Akira Toriyama character 'Kane'
- Project Monolith - action adventure title for all platforms
- Crackdown 3 will be playable at Xbox FanFest 2018
- Agony Unrated is 90% off to Agony owners, releases Oct 31st
- How To Find Out Motherboard?
- I'm in a gaming rut please help.
- GIGABYTE Z390 Aorus Master (Intel Z390) Motherboard Review
- Akitio Thunder3 Dock Pro Review
- OnDeck Launches ODX for Banks
- Adobe Announces Next Generation of Creative Cloud at MAX 2018
- Sharkoon PURE STEEL: Minimalist PC Case for High-End Hardware
- Xara Designer Pro X v16 has been released
- Endless Road: Indie roguelite card game now on Steam