Thermal Imaging and Power Consumption
System power is measured at the wall with an AC power meter.
Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.
All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.
Thermal Testing at Stock Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans above the VRM that cool the CPU cooler's (Corsair H110i) radiator are turned on to high (12v).
Up-close of the front of the VRM.
Up-close of the back of the VRM.
Performance is solid, not the craziest I have seen, but very good at stock. MSI is using very high-quality components, so this is expected.
Low to moderate airflow 4.6GHz 1.75V VCCIN OCed VRM Thermal Imaging:
Temperature readings are taken after 40 loops of Intel Burn Test have been run (with AVX). Pictures of the setup are on the Test Setup Page. The two radiator fans (120mm Corsair) of the H110i blow in the general direction of the motherboard and VRM from the side (that is why the right side is slightly cooler in the first pic), so there is airflow (less than a case but more than a test bench with no airflow).
While the VRM on this motherboard is the same as that on the X299 Gaming Pro Carbon AC, the VRM temperature here are slightly better, and that could be a difference in ambient temperature, but it could also because of the copper content in the motherboard's PCB. From what I can tell, the motherboard's delta between back and front is also slightly better than on the X299 Gaming Pro Carbon.
Last updated: Nov 15, 2019 at 01:16 pm CST
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon.com
United Kingdom: Find other tech and computer products like this over at Amazon.co.uk
Australia: Find other tech and computer products like this over at Amazon.com.au
Canada: Find other tech and computer products like this over at Amazon.ca
Deutschland: Finde andere Technik- und Computerprodukte wie dieses auf Amazon.de
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging and X299 Gaming M7 ACK Overview]
- Page 3 [MSI X299 Gaming M7 ACK Circuit Analysis]
- Page 4 [MSI X299 Gaming M7 ACK Circuit Analysis Continued]
- Page 5 [BIOS and Software]
- Page 6 [Test System Setup]
- Page 7 [Overclocking]
- Page 8 [CPU, Memory, and System Benchmarks]
- Page 9 [System IO Benchmarks]
- Page 10 [VRM and System Thermal Imaging and Power Consumption]
- Page 11 [What's Hot, What's Not & Final Thoughts]