Thermaltake Core P3 ATX Wall Mountable Mid-Tower Chassis
After a bit of assembly, this is one of the ways the Core P3 can be built. From the front, we see a thick wall of steel to the right as the main body of this design, which includes the front I/O panel and a Tt logo. To the left of that, we find a view right through the chassis, blocked only by stainless steel bars, expansion slots, and PSU bracket.
The front I/O panel starts with LEDs for system power and HDD activity with a large power button just below them. There are USB 3.0 ports, USB 2.0 ports, and HD Audio jacks as we move down the panel, ending with the medium-sized reset button at the bottom.
Looking at the P3 from the left side offers an unimpeded view of the inside of the chassis since the entire panel is made of clear acrylic. Aside from the large clear panel, there are the caps for the support rods, which are also stainless steel, and delivers a clean look to the panel's installation.
From the back of the P3, we see the eight expansion slots, which we have opted to install perpendicular to the motherboard tray. We can also see the rear support bracket for the PSU, and since we intend to use an ATX motherboard, it needs to be in this orientation for our needs.
The right side of this chassis is a vast expanse of textured steel. Six thumbscrews hold the panel in place, the left side is used for ventilation and offers a dust filter, and of course, there are 12 holes for various wall mounting brackets. Since there not a traditional bottom for this chassis, we should mention we did install the large feet to allow the P3 to stand vertically for our build.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [Thermaltake Core P3 ATX Wall Mountable Mid-Tower Chassis]
- Page 4 [Inside the Core P3]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Gabe Newell is the 427th richest person in the world
- Sharp NES TV: a curious piece of 1980s gaming magic
- Sony's new PS4 controller for kids looks like a bad idea
- Switch sells over 2 million units in U.S. alone
- Gaming video to make $4.6 billion in 2017
- Will the PC-A76 accept a Tyan TYAN S7100 (S7100AG2NR) SSI EEB Mother board?
- MSI Z370 GODLIKE GAMING Motherboard Review
- GTX 1080 Ti 11GB - SLI or NOT !?
- GIGABYTE Z370 AORUS Gaming 7 Motherboard Review
- AORUS X9 (Kaby Lake) Gaming Laptop Review
- Introducing the CYBERPOWERPC Crystal Gaming Series Powered By CORSAIR
- COLORFUL Officially Releases iGame Z370 Vulcan X Motherboard in South Korea
- G.SKILL Releases DDR4-3800MHz 32GB (4x8GB) SO-DIMM Memory Kit for Mini-ITX Motherboards
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard