Thermal Imaging and Power Consumption
System power usage is measured at the AC/DC PSU (the Corsair AX1200i) which I have connected to another system to measure the test system, and as a backup, I have a wall meter to verify. The CPU power is measured through the 8-pin connector, which is hooked up to a hall effect IC, which measures current and puts out a voltage in proportion to the current. That voltage is logged by a National Instruments ADC, which logs the DC voltage level that I then convert into current.
Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.
All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.
Thermal Testing at Stock Speeds:
The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans above the VRM that cool the CPU cooler's (Corsair H110i GT) radiator are turned on to high (12v).
Up-close of the front of the VRM.
Up-close of the back of the VRM.
The VRM on the X70-Extreme ECC is not the best I have seen, but it is more than enough to provide cool operating temperatures no matter the processor installed because the motherboard cannot overclock. In fact, since the motherboard cannot overclock the processor, this VRM could be considered a slight overkill.
Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).
PRICING: You can find the GIGABYTE X170-Extreme ECC (Intel C236) Motherboard for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: The GIGABYTE X170-Extreme ECC (Intel C236) Motherboard retails for $316 at Amazon.
United Kingdom: The GIGABYTE X170-Extreme ECC (Intel C236) Motherboard retails for £203 at Amazon UK.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Mortal Kombat 11 to feature cross-play after initial launch
- Super Smash Bros. Ultimate: Piranha Plant debuts 'February'
- Mortal Kombat 11 on Switch has 'geometry reductions' & more
- New Layers of Fear 2 trailer cruises the midnight seas
- How to redeem your Piranha Plant, Super Smash Bros. Ultimate
- Samsung 970 EVO Plus SSD Review - The 96-Layer Refresh
- Optimum Health Optimum Health is conjugated linoleic risky.
- best 470 board for Windows 7?????????
- Can't connect to my Wifi network
- Need advice and build help
- Two Hat Is Changing the Landscape of Content Moderation With New Image Recognition Technology
- Top Executives Launch Blockchain-Powered Video Game Publishing Company
- Announcing Destiny Chaser's Global Launch!
- Dean Trotman Joins Sumo Digital as Commercial Director
- SmuggleCraft launches on Nintendo Switch 1/25