Technology content trusted in North America and globally since 1999
8,225 Reviews & Articles | 62,326 News Posts

Phanteks Enthoo Evolv ITX Tower Chassis Review

By: Chad Sebring | Small Form Factor Cases in Cases, Cooling & PSU | Posted: Aug 12, 2015 2:06 pm
TweakTown Rating: 98%Manufacturer: Phanteks

Accessories and Documentation




The box we found in the 3.5" drive bays is marked as the Accessory Box, and in it this is what we found. There is a basic guide to getting a build completed inside this chassis. Also in a bag within the same box, we find short thumbscrews, longer thumbscrews, PSU screws, four zip ties, and a few M3 screws at the right.





One of the two boxes that broke free inside the chassis is for this PH-HDDKT_01. This is a hanging cage for a 3.5" drive that can replace the 2.5" version already hanging behind the motherboard tray.




The other box offers us the PH-PUMBKT_01. This is a rubber padded and easily installed pump bracket. This side has rubber on both sides so when mounted to the chassis is makes no noise, and the entire other side has rubber as well to mount the pump on top of for more isolation.

    We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.

Related Tags

Got an opinion on this content? Post a comment below!