In this section, I will go through overclocking this board.
Max CPU Overclock is found by setting the VCore to 1.5v, Input voltage to 2.1v, cache voltage to 1.15v, booting with a CPU multiplier of 45x and disabling any features that would result in CPU frequency fluctuation. I then proceed into Windows and used Rapid OC buttons to increase the multiplier.
5.0GHz is the maximum of our CPU on this board and other X99 motherboards. It is clear that this board is pretty good for CPU overclocking. Maximum AIDA64 Stable Overclock (BIOS settings below for this):
I was easily able to pull off 4.5GHz on the CPU with 3.3GHz cache overclock and 2133MHz on my memory manually tuning the UEFI.
This section is a new addition. Corsair was nice enough to provide a 3200MHz quad-channel DDR4 kit for our benchmarks, and I decided to see how easy it is to boot with their XMP profile on different motherboards. In the early days of X99 trying to boot with the 32x memory multiplier was a nightmare, some boards did it with a lot of training (loops on startup), and some didn't even have the option. At this point in time I decided to test out how easy it is to use on each board.
The Fatal1ty X99 Professional/3.1 handled this kit with ease and when I loaded XMP it set the 32x multiplier from the get-go. I was able to boot into Windows and there was no noticeable memory training upon the first boot. I then restarted from Windows and had no issue with memory training again. I then shut the computer down, waited five minutes and powered up, the board performed perfectly. The board sets MRC Fast Boot to enable, Training to enable, and sets 1.36v for the DRAM voltage.
Boards with the extra pins in the socket can overclock the cache further, on this board I was able to OC the cache to 4.5GHz, while the core was 4.5GHz.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging and the Fatal1ty X99 Professional/3.1]
- Page 3 [Fatal1ty X99 Professional/3.1 Circuit Analysis]
- Page 4 [Fatal1ty X99 Professional/3.1 Circuit Analysis Continued]
- Page 5 [BIOS and Software]
- Page 6 [Test System Setup]
- Page 7 [Overclocking]
- Page 8 [CPU, Memory, and System Benchmarks]
- Page 9 [System IO Benchmarks]
- Page 10 [Thermal Imaging and Power Consumption]
- Page 11 [What's Hot, What's Not & Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Serious Sam 4: Planet Badass isn't open world, still HUGE
- RX Vega 56 with 120W TDP inside Acer's new gaming notebook
- PUBG: 50 million copies sold, 400 million players
- Vega 20 teased in AotS benchmark, AMD's new 7nm GPU tested
- Fallout 76 beta comes first to Xbox One
- DDR4-3400 - Ryzen 7 1800x & Ryzen 7 2700x - X370 & X470
- LaCie DJI Co-Pilot 2TB Review
- Dumb question regarding moderator approval
- ASUS ProArt PA27AC Monitor: The Best Workstation Monitor?!
- Asus X401A Laptop will not boot despite several replaced components
- Micron Launches Industry's First Enterprise SATA Solid State Drives Built on Leading 64-layer 3D NAND Technology
- Micron, Rambus, Northwest Logic and Avery Design to Deliver a Comprehensive GDDR6 Solution for Next-Generation Applications
- Toshiba Memory America Unveils UFS Devices Utilizing 64-Layer, 3D Flash Memory
- ASUS Announces GeForce GTX 1070 Ti Series Gaming Graphics Cards
- ASUS Announces ASUS Hangouts Meet Hardware Kit