Accessories and Documentation
In that huge box, we find a lot of goodies to cover. Here we have a set of long fan screws for the front of the chassis, a few extra standoffs, bay adapter screws, and the PSU screws along the top. At the bottom are the 6/32 and M3 screws, both of which we get a small handful of.
Since there are screws for bay adapters, here we have the adapters. In the front is a single 5.25" to 3.5" adapter, which is cut to keep the drive cool. As for the pair in the back, the bits of the floor fold up, and you can then take 3.5" bays and turn them into a 2.5" bay. Of course, all of the trays in the HDD rack are pre-drilled for 2.5" drives, so we can only assume these go in the ODD bays, screwed to their floor.
In yet another bag of goodies, we find a mesh 5.25" to 3.5" bay adapter to use in the front of the chassis, a motherboard speaker, and a set of five long zip ties.
When we first opened the top of the box, outside of the inner packaging, we found a bag of paperwork. In that bag we found the user's manual for the chassis that takes you through everything from parts, through the build, and even shows off the options this chassis offers. There is also an insert included covering the warranty terms and conditions.
If the cooling options were still sort of vague, this image should clear all of that up. To the left is a diagram covering all of the fan placement options. To the right, we find two diagrams that show what will fit, and where to install, depending on the screw spacing.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [Thermaltake Core V41 Mid-Tower Chassis]
- Page 4 [Inside the Core V41]
- Page 5 [Accessories and Documentation]
- Page 6 [Case Build and Finished Product]
- Page 7 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Samsung's new 360-degree camera requires 2 x GTX 1080 Ti
- ASUS: Z270 platform could work with Coffee Lake CPUs
- GTX 1070 Ti leaked benchmarks: easily beats RX Vega 56
- GIGABYTE's upcoming GeForce GTX 1070 Ti Gaming spotted
- ARK on Xbox One X: renders at 1440p 30FPS or 1080p 60FPS
- ASUS ROG Strix Vega 64 Unboxed: The First Custom RX Vega
- Replacement AC adapter for RT-AC88U
- Can't disable CPU SPECTRUM on a Z97-D3H
- ECOLA Ultra Slim Laptop Cooling Pad Chill Mat
- ASUS Battery Health Charging - windows 10 
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard
- ASRock announces X299E-ITX/ac, world's first mini-ITX LGA2066 motherboard
- Noctua introduces chromax line fans, cables and heat sink covers
- G.SKILL Releases Fastest 32GB (4x8GB) Trident Z RGB Memory Kit at DDR4-4266MHz