Reeven Six Eyes Fan Controller
Fresh out of the box, we get our first look at the face of the Six Eyes II. The top and bottom edges are angled back from the full extent of the front panel, and offer a place for the Reeven name at the top. On either side, there are three knobs marked in Roman numerals, while across the center are the two rows of three LCD screens.
Along with the face of the Six Eyes II, both sides and the bottom support section are made of black plastic, and all sections not seen are left smooth. On either side of the controller there are a pair of holes like these that will work with any tool-free clips, and will align with screw holes in bay racks as well.
If you are not familiar with the layout of the original, the major change seen here will be less impressive. For those that are familiar, it is easy to see that the power delivery system has been considerably beefed up, and the PCB layout has changed almost everywhere except for the layout of plugs, sensor ports, and switches across the back edge.
Instead of having huge passive heat sinks on power FETs, this time around, we see the main delivery runs through the FETs at the back, through what I assume are chokes, and then it runs through the chemical capacitors in the front row before it is distributed to the six channels of this controller.
As we move in very close to the right end of the last image, we find the onboard controls. The three-pin jumper on the left changes the display between Fahrenheit and Celsius by moving the jumper. The red switches on the left are to control the various settings of the thermal alarm, and the one to the right changes the display LEDs. The two pins to the right allow the alarm buzzer behind it to be disabled by removing the jumper.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Gears of War 4 to release Halloween Event and Update
- Star Wars The Last Jedi is expected to make $760 million
- GIGABYTE reveal the AORUS X9 gaming laptop
- ASUS announce ROG Strix X370-I & B350-I motherboards
- Microsoft wants you to 'feel true power' with Xbox One X
- ADATA XPG SX950 480GB SATA III SSD Review
- Lenovo Legion Y920 (Kaby Lake) Gaming Laptop Review
- Gigabyte Z97 Gaming GT: PCIe slots 3.0 that working only at 1.0 with an ASUS Hyper M.2 x4 expansion card
- Gigabyte Z97X Gaming GT: PCIe 3.0 that work only at 1.0 with Asus Hyper m.2 x 4 card
- Gigabyte AB-350 G3 CPU LED & No POST after update ->rollback?
- Introducing the CYBERPOWERPC Crystal Gaming Series Powered By CORSAIR
- COLORFUL Officially Releases iGame Z370 Vulcan X Motherboard in South Korea
- G.SKILL Releases DDR4-3800MHz 32GB (4x8GB) SO-DIMM Memory Kit for Mini-ITX Motherboards
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard