Accessories and Documentation
In this image we have the AMD head unit mounting brackets flanking both sides. These can easily be swapped out with the Intel brackets that come screwed onto the head unit already. The back plate is universal of AMD and Intel, and it is drilled to allow the bracket to go on two ways for Intel systems.
Here we have spacers, mounting screws with springs for tension, and the LGA2011 mounting screws to the left. There are eight short screws to mount the fans or the radiator, eight long fan screws for sending through both fans (and even the case), and that leaves us with the four studs that go through the back plate.
The rest of the hardware includes a Y-splitter cable to power both fans from one PWM header on the motherboard. There is also an LGA775 preload insert for the back plate, some thermal paste, and a sticker sheet to isolate the back plate for use with AMD motherboards.
The manual provides a parts list to verify you have what you are supposed to have, and takes you through all the steps needed to get the Liqtech 120X installed into any system it will fit inside of. There is really nothing about this kit that is confusing, and it is really simple to install.
We also wanted to show off the pair of fans that come to cool that radiator. These are a pair of ED122512S-PA fans that boast over 100 CFM and over 7mm H2O of static pressure at full blast. If you look close at the fan on the right, you can also see the three position switch for the built-in fan controller.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications and Pricing]
- Page 2 [Packaging]
- Page 3 [Enermax Liqtech 120X AIO Liquid CPU Cooler]
- Page 4 [Accessories and Documentation]
- Page 5 [Installation and Finished Product]
- Page 6 [Test System Setup, Thermal Tests and Noise Results]
- Page 7 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Battlegrounds physical copy teased for Xbox One
- Gears of War 4 to release Halloween Event and Update
- Star Wars The Last Jedi is expected to make $760 million
- GIGABYTE reveal the AORUS X9 gaming laptop
- ASUS announce ROG Strix X370-I & B350-I motherboards
- ADATA XPG SX950 480GB SATA III SSD Review
- Lenovo Legion Y920 (Kaby Lake) Gaming Laptop Review
- Gigabyte Z97X Gaming GT: PCIe 3.0 that work only at 1.0 with Asus Hyper m.2 x 4 card
- Gigabyte AB-350 G3 CPU LED & No POST after update ->rollback?
- Introducing the CYBERPOWERPC Crystal Gaming Series Powered By CORSAIR
- COLORFUL Officially Releases iGame Z370 Vulcan X Motherboard in South Korea
- G.SKILL Releases DDR4-3800MHz 32GB (4x8GB) SO-DIMM Memory Kit for Mini-ITX Motherboards
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard