Accessories and Documentation
In this image, the majority of the hardware is accounted for. There is the cross bar and universal back plate in the middle. To the left are the rubber screw holders, plastic risers, and top mounting screws. To the right is the Intel mounting brackets, and at the bottom are the screws to be sent through the back plate.
The rest of the kit offers a large tube of GamerStorm thermal grease, four wire fan clips, the AMD mounting brackets, a spacer for LGA775 installation, and last but not least are the LGA2011 socket mounting screws.
In the other box that flanks the tower inside of the box, the 140mm fan is shipped. The nine green blades have three edges to help direct the airflow through the rubberized black frame. The chromed center cap with the GamerStorm logo is also a nice touch to dress it up a bit. Lastly, the fan uses a 4-pin PWM connection for power.
There is also a user manual offered with the Lucifer. The front mimics the packaging and offers the other side of the logo that was missing just before we opened the inner packaging.
Things start off with the parts list. Here you are given a drawing of each component along with a parts count. This way you are certain everything is here before tearing down a system to replace an existing cooler.
This is an example of the kind of instructions given throughout the manual, for both AMD and Intel. Mostly there are just good quality drawings with arrows and obvious points seen to follow. There is very little in the form of test instructions other than the mini notes in the images.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction]
- Page 2 [Specifications, Availability and Pricing]
- Page 3 [Packaging]
- Page 4 [GamerStorm Lucifer CPU Cooler]
- Page 5 [Accessories and Documentation]
- Page 6 [Installation and Finished Product]
- Page 7 [The Test System and Thermal Results]
- Page 8 [Noise Level Results]
- Page 9 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Galaxy S9: 6GB RAM, headphone jack is a selling point
- Mass Effect dev: EA only cares about highest returns
- Gabe Newell is the 427th richest person in the world
- Sharp NES TV: a curious piece of 1980s gaming magic
- Sony's new PS4 controller for kids looks like a bad idea
- RAID on a new X370 Fatal1ty Gaming X with m.2 SSDs using a PCIe card.
- LGA-775 GA-EP35-DS3P (rev 2.1), Q9550 e0 overclocking advice please?
- Will the PC-A76 accept a Tyan TYAN S7100 (S7100AG2NR) SSI EEB Mother board?
- MSI Z370 GODLIKE GAMING Motherboard Review
- GTX 1080 Ti 11GB - SLI or NOT !?
- Introducing the CYBERPOWERPC Crystal Gaming Series Powered By CORSAIR
- COLORFUL Officially Releases iGame Z370 Vulcan X Motherboard in South Korea
- G.SKILL Releases DDR4-3800MHz 32GB (4x8GB) SO-DIMM Memory Kit for Mini-ITX Motherboards
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard