Inside the Azza Genesis 9000
Inside of the right door panel there are two 120mm fans mounted to keep the drives in the front as cool as possible in that long stack of bays. Both fans are 4-pin Molex powered, even though there are cool little fan headers just inside where these sit.
The first look inside the Genesis 9000 shows the long stack of bays on the left, a VGA support bracket hanging in the middle and an otherwise open and ready to pack full of parts space.
There are in fact nine 5.25" bays, but the first four are intended for 5.25" drives where the other five have hard drive sleds in them. The top two hard drive bays have back planes to allow for two of these to have the easy swap feature.
Moving in closer, you can now see that these back planes are Molex powered, contain SATA connections to make life easy and have the three pin fan headers on them. These are where I would have liked to have plugged in the door fans. There is also a RED activity LED to show if the bay is working.
Below these nine bays are two more 5.25" bays that have PSU support pads at the bottom of them. There is also a long extension power cable to allow you to use the cord on the back of the case.
The top of the chassis is removable to gain access to the 230mm fans that are already in there. You can remove them and replace them with four 120mm fans and of course a 480mm radiator.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction]
- Page 2 [Specifications, Availability and Pricing]
- Page 3 [Packaging]
- Page 4 [Azza Genesis 9000 Full Tower Chassis]
- Page 5 [Inside the Azza Genesis 9000]
- Page 6 [Inside the Azza Genesis 9000 Continued]
- Page 7 [Accessories and Documentation]
- Page 8 [The Build and Finished Product]
- Page 9 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Surface Pro LTE delayed until at least Spring 2018
- NeoGAF goes down, owner embroiled in sexual harrassment
- ASUS ROG Strix GTX 1070 Ti teased with triple-fan cooler
- Bitcoin hits $6000, with $100 billion in value
- Galaxy S9: 6GB RAM, headphone jack is a selling point
- Gigabyte AB-350 G3 CPU LED & No POST after update ->rollback?
- AMD Threadripper vs. Intel Core i9 CPUs Clock for Clock
- ex58-UD3R rev 1.6
- RAID on a new X370 Fatal1ty Gaming X with m.2 SSDs using a PCIe card.
- LGA-775 GA-EP35-DS3P (rev 2.1), Q9550 e0 overclocking advice please?
- Introducing the CYBERPOWERPC Crystal Gaming Series Powered By CORSAIR
- COLORFUL Officially Releases iGame Z370 Vulcan X Motherboard in South Korea
- G.SKILL Releases DDR4-3800MHz 32GB (4x8GB) SO-DIMM Memory Kit for Mini-ITX Motherboards
- EK Water Blocks releases new Slim Series kits
- BIOSTAR releases new RACING Z370GT7 motherboard