Version and / or Patch Used: 1.1.0
Product Homepage: http://www.iometer.org
Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It was originally developed by the Intel Corporation, and announced at the Intel Developers Forum (IDF) on February 17, 1998; since then it's become wide spread within the storage industry.
We use Iometer to measure disk response times. Disk response times are measured at an industry accepted standard of 4K QD1 for both write and read. Each test is run twice for 30 seconds consecutively, with a five second ramp-up before each test. The drive/array is partitioned and attached as a secondary device for this testing.
Average Disk Response
Write response times benefit most from RAID 0 because of write caching. There is a slight latency increase in read response times for an array vs. a single drive. Response times are excellent despite the drives' TLC NAND array.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction]
- Page 2 [Specifications, Pricing and Availability]
- Page 3 [Samsung SSD 840 EVO mSATA SATA III SSD]
- Page 4 [Benchmarks - Test System Setup, Drive Properties & ATTO Baseline Performance]
- Page 5 [Benchmarks - Anvil Storage Utilities]
- Page 6 [Benchmarks - CrystalDiskMark]
- Page 7 [Benchmarks - AS SSD]
- Page 8 [Benchmarks - PCMark Vantage]
- Page 9 [Benchmarks - PCMark 7]
- Page 10 [Benchmarks - PCMark 8]
- Page 11 [Secondary Volume Benchmarks - Blackmagicdesign's Disk Speed Test]
- Page 12 [Secondary Volume Benchmarks - Disk Response Times]
- Page 13 [Secondary Volume Benchmarks - DiskBench]
- Page 14 [Final Thoughts]
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.