You can read more about TweakTown's Storage Product Testing Workstation and the procedures followed to test products in this article.
Today we will be taking a look at the performance of two matching A-DATA S599 SSDs in RAID 0 to observe their performance. Testing was conducted on a GIGABYTE X58A-UD7 motherboard using the onboard Intel SATA II controller and the latest Intel RST 9.6 driver.
The new RST 9.6 driver is the first from Intel to fully support the TRIM command in RAID 0. To achieve maximum write performance we had to play around with the settings and ended up running around 5 rounds of tests.
ATTO Baseline Performance
Version and / or Patch Used: 2.34
ATTO is used by many disk manufacturers to determine the read and write speeds that will be presented to customers.
In ATTO we see the read speeds leaping very quickly to nearly full speed, while the write speeds needed a little more depth to achieve the maximum performance. Both read and write results are smoking fast and with the new RST driver in place will stay that way for a long time.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon.com
United Kingdom: Find other tech and computer products like this over at Amazon.co.uk
Australia: Find other tech and computer products like this over at Amazon.com.au
Canada: Find other tech and computer products like this over at Amazon.ca
Deutschland: Finde andere Technik- und Computerprodukte wie dieses auf Amazon.de
- Page 1 [Introduction]
- Page 2 [Specifications, Pricing and Availability]
- Page 3 [Test System Setup and ATTO Baseline Performance]
- Page 4 [Benchmarks - HD Tune Pro]
- Page 5 [Benchmarks - Everest Random Access Time]
- Page 6 [Benchmarks - Crystal Disk Mark]
- Page 7 [Benchmarks - PCMark Vantage Hard Disk Tests]
- Page 8 [Benchmarks - AS SSD]
- Page 9 [Benchmarks - Passmark]
- Page 10 [Final Thoughts]