A very large image of the MasterLiquid Pro 240 is used for the backdrop on the front panel. On the left side, we see all of the company and product naming, with a pop of light blue used in the 240 to help attract the eye to it. On the right end, we see that the head unit comes with a blue glow under a clear top panel.
Cooler Master keeps things simple on this end. They again offer the product name, company name, and logo, and display their AIO near the bottom, with a view of the copper cold plate.
The back offers quite a bit more to digest than the previous two. Off to the left is a statement of what went into the design of the MasterLiquid kits with multilingual lists of features below. In the middle is an image of the radiator, and exploded view of the head unit and pump. Under those images, we then find dimensional renderings for all the components.
The last end of the packaging for the MasterLiquid Pro 240 delivers the specifications chart. We can only assume they opted for new fans to accompany this kit after the Packaging was printed. We say this, as the fans we were sent can top out at 2000 RPM, and that we could and did verify.
The inner packaging is completely new to us and is overdesigned to ensure no damage occurs to any component. The head unit is pushed into a box with dense foam around it, and between it and the hoses, the fans are laying under the cardboard. At the bottom, in its section is the radiator, and at the right end is a hardware box. So not only is Cooler Master offering their take on an AIO, they make sure that their coolers arrive in pristine condition for testing, as ours did.
PRICING: You can find the Cooler Master MasterLiquid Pro 240 CPU Cooler for sale below. The prices listed are valid at the time of writing, but can change at any time. Click the link below to see real-time pricing for the best deal:
United States: The Cooler Master MasterLiquid Pro 240 CPU Cooler retails for $124 at Amazon.
United Kingdom: The Cooler Master MasterLiquid Pro 240 CPU Cooler retails for £90 at Amazon UK.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [Cooler Master MasterLiquid Pro 240 CPU Cooler]
- Page 4 [Accessories and Documentation]
- Page 5 [Installation and Finished Product]
- Page 6 [Test System Setup, Thermal Tests, and Noise Results]
- Page 7 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- Battlegrounds on Xbox One X: 30-40FPS with 100 in server
- Full PC with AMD Ryzen ThreadRipper starts at just $1699
- AMD Ryzen 5 2500U spotted, new APU rocks Vega GPU tech
- AMD Radeon RX Vega could be priced at up to $850
- Ryzen ThreadRipper delidded: half its CPU dies disabled
- Fnatic Gear RUSH G1 Mechanical Gaming Keyboard Review
- Asrock A88M-G/3.1 + A10-7860K = freezes in the idle state
- ASUS GeForce GTX 1060 Dual 3G: Mid-Range On The Cheap
- AMD Ryzen 3 1300X and Ryzen 3 1200 CPU Review
- Lian-Li PC-O5SW...Watercooling and dimensions
- Toshiba introduces TR200 SATA retail SSD series with 64-layer 3D flash memory
- Need for Speed Payback takes cars from scrap to stock to supercar in new trailer
- Visbit releases Unity SDK and web VR player for its all-in-one VR streaming service, bringing high quality VR streaming to the masses
- GWENT Gamescom 2017 tournament announced
- Toshiba NVMe SSDs now available with Lenovo's new ThinkSystem and ThinkAgile servers