Tech content trusted by users in North America and around the world
7,298 Reviews & Articles | 53,260 News Posts

GIGABYTE Z170X-UD5 TH (Intel Z170) Motherboard Review

By: Steven Bassiri | Socket LGA 1150/1151 in Motherboards | Posted: Nov 13, 2015 11:15 pm
TweakTown Rating: 94%Manufacturer: GIGABYTE

Thermal Imaging and Power Consumption

 

System power usage is measured at the AC/DC PSU (the Corsair AX1200i) which I have connected to another system to measure the test system, and as a backup I have a wall meter to verify. The CPU power is measured through the 8-pin connector, which is hooked up to a hall effect IC, which measures current and puts out a voltage in proportion to the current. That voltage is logged by a National Instruments ADC, which logs the DC voltage level that I then convert into current.

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Note on Thermal Images: In the temperature section, we use our Seek thermal imaging camera to capture the surface temperatures of major components on the board. I look at the VRM and then all other things that light up the screen. If there is something to worry about, then I will state it. Otherwise, I will just show the hotter running parts of the board for fun. Unless some component is over 80-90C, then there isn't anything to worry about.

 

 

All systems will act differently, so I will look for commonalities, such as how far from the VRM the heat spreads through the PCB and the difference in temperature between the front side and backside of the PCB. Keep in mind, the majority of the heat from the VRM goes into the PCB as it is a giant soldered on copper heat sink. A larger difference in temperature between the back and front of the PCB points towards a more effective heat sink.

 

Thermal Testing at Stock Speeds:

 

The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans above the VRM that cool the CPU cooler's (Corsair H110i GT) radiator are turned on to high (12v).

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Full frontal.

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Up-close of the front of the VRM.

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Up-close of the back of the VRM.

 

 

Thermal Testing at 4.5GHz Overclocked Speeds:

 

The image on the left is always at idle, and the image on the right is at load. During ALL TESTS, fans above the VRM that cool the CPU cooler's (Corsair H110i GT) radiator are turned on to high (12v).

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Full frontal.

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Up-close of the front of the VRM.

 

gigabyte-z170x-ud5-th-intel-z170-motherboard-reviewgigabyte-z170x-ud5-th-intel-z170-motherboard-review

 

Up-close of the back of the VRM.

 

The VRM on the Z170X-UD5 TH isn't built for hardcore overclocking, but it is fairly decent even though it isn't using the praised IR digital PWM and integrated power stages. The Z170X-UD5 TH also has more copper in the PCB than other motherboards to improve thermals and signaling (perhaps to pass TB 3 Certification) which in turn helps reduce temperatures.

 

Overall, I did not see any crazy increase in stock to OC temperatures because the BIOS did apply an aggressive multi-core enhancement profile at stock, meaning the overclocked conditions are very similar to stock conditions.

 

Anything under 60C is great, 60-80C is acceptable, and anything above 80C is a bit worrisome (if at stock).

    We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.

Related Tags

Got an opinion on this content? Post a comment below!
loading