Case Build and Finished Product
We had no significant issues during the build process. There was plenty of room for our test system in the 707, and our wiring reached everything needed while running through all of the grommets. The top has plenty of room for a radiator and fans, and there is even room for a reservoir to hang on the motherboard tray.
The rear dust shield snapped right into position, but when it came to the GPU, we did have to flex the back of the chassis inward to get the screws to align with the case and bracket. Since the rails on the floor support the PSU, screwing the PSU in place is simple with the holes lined up and ready to go.
We took advantage of the few tie points available for the front I/O wiring to make sure that beige and rainbow assortment stays hidden. We have plenty of room for the 8-pin, 24-pin, and even the GPU power leads to all hide back here and pop out where needed.
Now that the Gaming Black 707 is assembled, we can get ready for testing., In normal conditions, the view through the window is muted with the dark tint, but adding a bit of light inside would dramatically increase the view of the components. Adding a light inside would also accent the InWin name (which is near impossible to capture in a picture) in the window.
After plugging the PSU into the wall, we pressed the power button and were greeted with this thin band of blue LED, which let us know the chassis was powered up. There is also a flicker on the other end of this strip, where the amber HDD LED is found.
Here we can see the red LEDs of the exhaust fan shining through the side window. It is a nice touch to carry some of that red all the way through to the back; there are no LEDs in the front fans.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [InWin Gaming Black 707 Full-Tower Chassis]
- Page 4 [Inside the Gaming Black 707]
- Page 5 [Accessories and Documentation]
- Page 6 [Case Build and Finished Product]
- Page 7 [Final Thoughts]
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- AMD ThreadRipper 1998X: 16C/32T @ 3.9GHz, 44 PCIe lanes
- EVGA teases its GTX 1080 Ti FTW3 Hybrid graphics card
- ARM announces new CPUs and GPU at Computex 2017
- ASUS leaks its own Strix X299-E motherboard
- You've less than 7 days to enter our 'Rings' giveaway!
- Asrock X99 Extreme11 reports only 48GB instead of 64 GB
- H270m Pro4 Can't boot with my SSD, stuck on splash
- Gigabyte z170 UD5: Question about Voltage Spikes/Offset
- ASRock AliveXFire-esata2 compatibility with Phenom II X4 980
- m4a88td-m/usb3 & Windows 10
- Qualcomm fuels IoT growth by currently delivering more than 1 million chips a day into a wide range of connected applications
- Team Group announces theme for COMPUTEX 2017 showcase: go beyond the limit and reach for the top
- SAPPHIRE announces PULSE Radeon RX 560 graphics card
- ELITEGROUP computer to stand out at Computex for its smart campus deployment, robotic technology, education laptops, tablets, mini PC, and motherboards
- ADATA Shares a Symphony of Technology at Computex 2017