Accessories and Documentation
The hardware box we found on top of the cooler has quite a bit inside of it. Here we find the universal back plate off to the left, and to the right is a packet of paste, four white nylon spacers, four black rubber retaining washers, and a LGA775 preload spacer, which is also made of black rubber.
Across the top are the four screws included to screw into the LGA2011 and LGA2011 V3 sockets. In the middle, we find four nuts to lock the cooler brackets to the motherboard hardware, as well as the set of four studs that pass through the back plate for anything that isn't LGA2011. That leaves us with the pair of screws for the cross bar, and the wrench that fits all the hardware that needs tightened above the board.
The top plate on the left is also universal. It has three holes at each corner for Intel mounting, but if you look around the edges, there are notches that also allow this plate to secure to AMD motherboards. Off to the right is the cross bar that secures the cooler to this top plate with the use of the two threaded holes.
The rest of the gear included in the box is shown here. There is a low-voltage adapter to keep the fan at 7V, if that is your desire. There is also a manual that walks you through every step, and is very easy to follow. We like that there are also four wire fan clips provided, in case you want to add a second fan.
Along with the stunning top plate on this cooler, a regular fan just wouldn't do, so Reeven chose this bright yellow bladed fan to add a huge splash of color, and there are also a few cases and motherboards out there that this would seamlessly blend into.
PRICING: You can find products similar to this one for sale below.
United States: Find other tech and computer products like this over at Amazon's website.
United Kingdom: Find other tech and computer products like this over at Amazon UK's website.
Canada: Find other tech and computer products like this over at Amazon Canada's website.
- Page 1 [Introduction, Specifications, and Pricing]
- Page 2 [Packaging]
- Page 3 [Reeven Ouranos RC-1401 CPU Cooler]
- Page 4 [Accessories and Documentation]
- Page 5 [Installation and Finished Product]
- Page 6 [Test System Setup, Thermal Tests and Noise Results]
- Page 7 [Final Thoughts]
Recommended for You
- We at TweakTown openly invite the companies who provide us with review samples / who are mentioned or discussed to express their opinion of our content. If any company representative wishes to respond, we will publish the response here.
Latest News Posts
- NVIDIA CEO hands out first Tesla V100s to AI researchers
- ADATA's new XPG SPECTRIC D40: RGB DDR4 for X299
- Battlegrounds made more than Overwatch on PC last month
- Intel Core i9-7920X: 12C/24T @ 4GHz, 140W TDP, and $1199
- AMD Ryzen ThreadRipper features next-gen packaging
- GIGABYTE X299 AORUS Gaming 7 Motherboard Review
- Comic-Con 2017 trailer round-up: MCU vs DCEU vs the rest
- graphics card not detected via riser cable
- Maximum ratio (x39) with 4,06GHz for i7 4770 on GA Z87X-UD3H?
- Supermicro SuperO Booster Software Guide
- ADATA Debuts XPG SPECTRIX D40 RGB DDR4 RAM
- Atari announces Blade Runner 2049 partnership with NECA and Audiowear, launching wearable technology that blurs the line between fashion and future
- BIOSTAR introduces the world's first 8-slot PCI-e mining motherboard with the TB250-BTC+
- HyperX unveils HyperX Alloy Elite and TKL HyperX Alloy FPS Pro mechanical gaming keyboards
- Toshiba Memory Corporation develops world's first 3D flash memory with TSV technology