TweakTown
Tech content trusted by users in North America and around the world
6,007 Reviews & Articles | 38,761 News Posts

Feenix Nascita 2014 Laser Gaming Mouse Review - Feenix Dimora

Feenix Nascita 2014 Laser Gaming Mouse Review
A brand new company applies its hand at gaming mice. Stick with us while we bring you the new Nascita from Feenix and see how it goes in our review.
| Mice in Peripherals | Posted: Dec 10, 2013 3:00 pm
TweakTown Rating: 88%Manufacturer: Feenix

Feenix Dimora

 

TweakTown image content/5/9/5930_30_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

The packaging for the Dimora is quite the same as what the Nascita offered. On the top of the large box, Feenix simply puts their logo right in the middle with a glossy finish to contrast the flat black box.

 

TweakTown image content/5/9/5930_31_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

On just the leading edge of the box, the Dimora naming is applied again, with just the finishes to distinguish the name apart from the background.

 

TweakTown image content/5/9/5930_32_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

The back of this box is identical to what we found with the Nascita as well. Here, outside of the fact that the colors have been reversed, it is the exact same information we saw on the back of its packaging.

 

TweakTown image content/5/9/5930_33_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

There is also a card that comes with the Dimora, and again it is simply marked with the Feenix logo on this side.

 

TweakTown image content/5/9/5930_34_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

Flipping the card over there is a new tag line, "the foundation for excellence," under the Dimora naming this time. Of course it is out of the box ready, but Feenix advises registering the product to gain access to the "owner's area". It is also nice to see that there is more than one guy in support, as Chad has now been replaced by Adrian.

 

TweakTown image content/5/9/5930_35_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

A close-up of the Dimora says a lot about this surface in one image. There is the highly reflective, micro-textured surface plainly visible, as is the polished section that runs around all the edges. This corner also offers the engraved Feenix logo, and it is the only marking on the surface.

 

TweakTown image content/5/9/5930_36_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

Flipping the Dimora onto its face, with the fact that this is 6mm in thickness, unless they were delivering a solid slab, they have to address strength. This arrow pattern allows them to reduce the amount of supports needed, but the surface has smaller sections without support than other designs.

 

TweakTown image content/5/9/5930_37_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

To keep the Dimora situated on all surfaces there are these clear silicone feet. There are twelve in total across the three rows of feet. This allows this surface to stay very sure footed, even on glass.

 

TweakTown image content/5/9/5930_38_feenix_nascita_2014_laser_gaming_mouse_review.jpg

 

Stepping back, we can see that this is a smaller mediums sized surface once the Nascita is placed atop the Dimora. The surface along with this laser is a great combination and is very accurate, with the right DPI dialed in; there is little need to cover vast areas anyways.

Related Tags

Further Reading: Read and find more Peripherals content at our Peripherals reviews, guides and articles index page.

Do you get our RSS feed? Get It!

Got an opinion on this content? Post a comment below!

Latest Tech News Posts

View More News Posts
Check out TweakTown Polls on LockerDome on LockerDome

Forum Activity

View More Forum Posts

Press Releases

View More Press Releases