The Motherboard Continued
Moving to the top of the motherboard, we can see our four RAM slots which support up to 16GB of DDR3 at speeds of up to 2133MHz DDR. Below the RAM slots you can also see our main 24-Pin ATX power connector.
Apart from the RAM slots there's not much else going on up here with only a couple of fan headers being the only stand out.
Looking around the CPU area, you can see our 8-Pin CPU power connector in the back corner with heaps of room around it. The CPU area is pretty clean and you can see a fairly nice heatsink setup going on with it being shown that this board is a part of the Hummer series.
Looking at the I/O side of things, you can see from the left we've got a combo PS/2 port and two USB 2.0 ports. Moving over, we've got a DVI and VGA port, another two USB 2.0 ports and a HDMI port. Next to this we've got two USB 3.0 ports controlled via the ASMEDIA controller, another two USB 2.0 ports, Gigabit networking and our audio jacks.
Page 3 of 12
Further Reading: Read and find more Motherboards content at our Motherboards reviews, guides and articles index page.
Do you get our RSS feed? Get It!