The Cooler

Looking at the cooler from the top we see all of the aluminium fins that dissipate heat from the CPU.

From the side the aluminium area looks almost like the Batman logo. We also see the heatpipes that run from the base to the top.

Here you can see that the Triton 75 uses the maximum available space to dissipate heat while still being compatible with motherboards that use high VRM coolers.

I hear the 70's theme to Batman in my head right now. ASUS uses a supporting bracket on this side so the cooler cannot flex.

This side is exactly like the previous side image except this is where ASUS places the serial number.

The base as it comes from the factory looks very rough. A little 1200 grit sand paper could fix that if you wanted to spend a few hours to get a perfect contact surface.