TweakTown NewsRefine News by Category:
Despite this news heavily circulating the web recently, it turns out that apparently AMD has no definitive plans to dabble long term in the DDR3 memory market. This comes as quite the surprise, though, given AMD even had a dedicated page on their own site indicating three new Radeon branded memory series in the lineup that looked to be aimed directly at the consumer market.
As it so turns out, the AMD Radeon branded modules spotted in random stores in Japan and even reports of some having been seen in Canada, were supposedly entered into the retail market in minimal quantity to ascertain whether or not it was a viable venture for AMD to distribute the series' through channel partners in the future.
Big news from AMD today with word (and evidence) coming out that they are branching out their "Radeon" branding from VGA into the DDR3 memory market as well, not just to OEMs, but directly into consumers hands.
Website PC Watch was the first to get the scoop (including images) that AMD is in fact entering the DDR3 memory market with "Radeon memory". Even AMD's website now backs it up with a dedicated page on their website detailing "AMD Radeon Memory for Systems" - with three series under the lineup thus far in the Entertainment, ULTRA PRO Gaming and Enterprise series'.
It's not surprising that AMD is targetting the modules directly for use in their own platforms. The first batch of modules entering the series are 2GB in density a piece, with the Entertainent series module operating at 1333MHz w/ timings of 9-9-9, the ULTRA PRO Gaming running 1600MHz (11-11-11 timings) and the Enterprise series memory of which specific info is yet to be disclosed.
Corsair has injected its impressive Dominator GT series of DDR3 modules with a shiny new 8GB DDR3-2133MHz dual channel kit today, capable of running at said speed using just 1.5v - this is with stock timings of CL 9-11-9.
Given the super low voltage, this makes the kit very attractive for overclockers with plenty of headroom. The kit uses Corsair's iconic DHX+ heatsinks and will come bundled with the AirFlow 2 GTL Cooling Fan to help really push the memory north without the issue of heat buildup limiting your overclock.
The kit, codenamed CMT8GX3M2A2133C9 is backed by Corsair's lifetime warranty and can be purchased directly off their site very soon at $499 USD.
iSuppli have come out and said that DDR3 modules will remain the dominant DRAM tech throughout 2011 and flowing right into 2012, 2013 and even into 2014 before DDR 4 arrives in its next-generation glory. DDR3 RAM currently represents 85 to 90-percent of today's DRAM market and that will swell to 94-percent by 2013. But in 2014, iSuppli is predicting that DDR4 will emerge out of the flames of the DRAM market with a 12-percent share, within a year they expect this number to expand to 56-percent leading DDR3 with just 42-percent of the market.
As you can see from the above chart, DDR3 really is the current champion and with 4GB DIMMs available so cheaply these days, it'll be a very hard switch to DDR4 for most people. Keepign in mind that DDR3 launched in 2007, that makes it a seven year life span for DDR3 until it gets some proper competition. Also keep in mind that whilst DDR3 launched in 2007, it was just too expensive for most users to change over to, but we know this has changed considerably over the years. DDR4 will most likely debut at huge prices and eventually fall just like all tech.
Deal of the Day: Corsair XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Kit - $52.99 after Rebate, Shipped Free
Our Deal of the Day today is the Newegg - Corsair XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Kit - $52.99 after Rebate, Shipped Free!.
Offer: Today only! Get this Corsair XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Kit for just $52.99 after rebate and coupon code with free shipping!
$20 PREPAID CARD MAIL-IN REBATE expires 06/30/2011.
Use coupon code: DM15JN11US for 15% off.
Computex Taipei 2011 - I mean absolutely no offence to Apacer here, but when I think of performance memory, they're not a company that comes to mind. Well don't they just want to tell me how wrong I am with some unreal looking kits.
Part of the Giant II series the new 4GB 2133MHz DDR kit offers fantastic speed with a 7-9-9-24-2T @ 1.65v setup. If that's not enough speed for you, or enough memory then the new ARES kit could be what you're after.
Offering 16GB of DDR3 at 2200MHz DDR with a 9-11-9-27-2T @ 1.65v setup this is just a massive amount of RAM at a massive speed. If that wasn't enough for you, though, Apacer had the kit overclocked to 2233MHz DDR at their booth on the ASUS P8Z68-V Pro board.
There's no denying that Apacer are ready to rock and roll in the high performance world with this new memory and we should hopefully be offering you a closer look at both kits in the near future.
COMPUTEX Taipei 2011: Down on the Computex floor G.Skill are strutting their stuff showing us what the new 990FX chipset from AMD is capable of. In an ASUS Sabertooth 990FX board G.Skill has got a staggering 16GB of DDR3 running at 2133MHz DDR.
The timings come in at 9-11-9-28 at 1.65v and as you can see from a pic of the system this is achieved with four modules making all the banks full.
This is actually a really nice achievement, most the time we see AMD users miss out on high end RAM but like previously G.Skill have come to the rescue again with its Flare Series.
For exactly what's going on you can see a picture of the CPU-Z information. If you're eyes are shot like mine, though, and you can't zoom in let me tell you they're using an Phenom II X6 1100T at the 3336MHz. They've lowered the multiplier to 12.5x and pushed the FSB to 266.9 MHz. Combined with a 1:4 divider on the Sabertooth 990FX they've been able to achieve 1067.6MHz or 2135MHz DDR.
It's great to see G.Skill giving some love to the AMD platform and no doubt this will be a monster kit when we get our hands on Bulldozer. For up to the second updates on stuff make sure you check out our TweakTown Facebook page as we feed information too it during the show.
COMPUTEX Taipei 2011: Earlier in the year we saw Crucial expand the popular Ballistix line by adding the new Sport series. The heatsink design was new and interesting and complemented the series well but today Crucial kick it up a notch by expanding the series again.
Outside of the Sport series you can see they've added the Tactical and Elite series into the mix. We don't have heaps of information on the series at the moment but it's fairly obvious that the Elite will no doubt carry the most aggressive speeds while the Tactical offers speeds slightly below that with more relaxed timings.
COMPUTEX Taipei 2011 - Corsair has got straight to work on what is officially Day 1 of Computex expanding the Vengeance series with a new LP Vengeance line. As you may have guessed from the title LP stands for Low Profile and compared to the current crop of Vengeance kits they are indeed not as tall following that more traditional height as you can see below.
We don't have exact data on what kits we'll see in the new line but offering an ultra-low 1.35v default voltage the kits will no doubt be sitting around the 1600 / 1866MHz DDR CL9 speeds. What we do know is that the kits will be available in both Triple and Dual Channel form for the X58 and P67 / Z68 platform.
Coming in a range of colors including Red, White and Blue the Vengeance LP series is a good looking one. The reduced height is also going to be appreciated for users who use massive air coolers and want good quality modules from a company like Corsair.
No doubt we'll be seeing more from Corsair over the next day or two, for up to the second updates on stuff make sure you check out our TweakTown Facebook page as we feed information too it during the show.
G.Skill has today announced that we'll be seeing a PC3-18400 RipJaws-X kit that carries a whopping default clock speed of 2300MHz DDR. This is achieved with a 9-11-9-28-2T @ 1.65v setup. Below, though, we can see in the screen shot G.Skill have actually managed to achieve 2303MHz DDR at 9-11-9-28-1T using the same voltage.
What makes the kit really stand out is the fact that it's an 8GB one versus 4GB, which is what we tend to see from these really high-end kits. Coming as no surprise the kit will be a limited edition and that's no doubt due to the fact it's such a high speed. Unlike the 2133MHz DDR kit, overclocking will be slightly more involved due to 2300MHz DDR not being a natively supported speed on the Intel P67 platform.
To achieve the default clock G.Skill tell us you'll need an ASUS Maximum IV Extreme or P8P67 Deluxe along with a CPU that's capable of achieving a 107.9 BCLK. While the first requirement won't be an issue for high-end users, a high BCLK achieving CPU comes down to luck of the draw.
Currently there's no pricing slated for the kit and the current ETA is "Coming Soon" but we should see the RipJaws-X PC3-18400 kit in the coming weeks with the G.Skill Turbulence II that you can see above...